Filter By:
- Parts & Accessories (22)
- Trainers (3)
- Smart Trainers (4)
- Show More Sizes
- Show Fewer Sizes
Indoor Cycling

$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- It only weighs 7 grams!
- Provides accurate cadence data during your ride
- (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties.
- The RPM can be worn on your shoe for spin classes or use with multiple bikes
- Two LED lights show the sensor's device connection (blue) and cadence detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM cadence sensor will fit with most bikes and frame sizes

$39.99
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- The RPM speed installs easily with no magnets required
- It only weighs 16.5 grams with the mount included
- Provides accurate speed data during your ride
- Mounts on most front wheel hub with a secure silicone casing
- Two LED lights show the sensor's device connection (blue) and speed detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM Speed will fit with most bikes and frame sizes

$99.99
Wahoo's latest accessory for the KICKR Smart Trainer lets you worry less about your connection and focus on your virtual ride at hand. No more wireless drop outs or signal interference—KICKR Direct Connect attaches your KICKR to your router for a constant streaming virtual ride or race. Compatible with many 3rd party apps including The Wahoo SUF Training App, TrainerRoad, Fulgaz, and many more.
Note: KICKR Direct Connect is not compatible with previous KICKR editions, KICKR CORE, and KICK SNAP.
Don't Get Dropped
No more worrying about your wireless connection dropping during your virtual races and online group rides. KICKR Direct Connect provides a hard-wired solution from your KICKR Smart Trainer to your internet router.
Safe and Secure
To prevent damage to the Direct Connect Pod or your KICKR, Direct Connect has a Quick disconnect cable that is robust enough to stay attached during normal use but will easily break the connection if enough pressure is applied.
Zero Configuration
Direct Connect is built on Multicast DNS to provide a simple, plug-and-play solution to stay connected.
App Compatibility
KICKR Direct Connect is compatible with The Wahoo SUF Training App, Trainer Road, Rouvy, Fulgaz, bKool, RGT Cycling, and Veloreality, with more 3rd party partners coming in the future.

$11.99
Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.

$19.99
Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only

$29.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

$29.99
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

$29.99
The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.

$39.99
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.

$49.99
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

$59.99
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.

$69.99
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.

$69.99
- Adapter for Tacx Direct Drive trainer
- 01 is compatible with 142 x 12mm and 148 x 12mm
- 02 is compatible with 135 x 10mm
- 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive
trainer), 142 x 12mm and 148 x 12mm
- 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the
thru axle mount on a Tacx NEO or FLUX Smart trainer.

$69.99
- Large and rollable trainer mat
- Made from high quality, water-repellent 6mm thick foam
- Protects your floor against scratches and sweat
- Muffles noise and vibrations
- 180 x 85 cm

$99.99
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.

$109.99
Give your Galaxia or Anteres the best possible protection for storage or transport by using this sturdy trainer bag. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage. This bag is ideal for riders who take their rollers to the track with them to warm up.

$119.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training.
- Suitable for handlebars with a diameter ranging from 26mm to 35mm
- Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

$249.99
The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds.
The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store.
The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers:
- T1980 Bushido (ANT+)
- T2020 i-Genius
- T2050 Tacx IRONMAN trainer
- T2060 Tacx IRONMAN Smart
- T2080 Genius Smart with Upgrade Smart
- T2170 i-Vortex
- T2180 Vortex Smart with Upgrade Smart
- T2240 Flow Smart with Upgrade Smart
- T2780 Bushido Smart with Upgrade Smart

$299.99
Take your ride inside with Tacx Boost. You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. Resistance can be controlled with a lever on the handlebar. The setup is easy—with just two simple clicks you mount your bike and you are ready to ride.
SIMPLE SETUP
With just two simple clicks, you'll be ready to ride.
SMALL BUT STABLE
This indoor trainer has a small footprint, 675 x 650 mm (26.6" x 25.6"), but provides a sturdy ride.
EASY TO STORE
Multifunctional front wheel support serves as a handle to carry the trainer and ensures a natural cycling position.
MAGNETIC BRAKE
You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it.
RESISTANCE CONTROL
A simple lever on your handlebar lets you control the resistance; 10 levels, up to 1,050 watts.
REALISTIC RIDE FEEL
An actual flywheel generates a realistic and smooth pedal stroke.
SMOOTH AND QUIET
The closed resistance unit reduces noise and makes for a smoother ride.
HOW FAR AND HOW FAST
Add a speed sensor (sold separately) to track how far and how fast you're riding and train with some of your favorite apps.
FEATURES
- Magnets: 2x8 Permanent ferrite magnets
- Transmission: Roller, 30 mm
- Electrical requirements: No voltage required
- Power indicator: None
- Connection indicator (ANT/BT): None
- Firmware upgradable: No
- Suitable bikes: Road, Tri, & MTB with skewer quick release
- Supplied with: Front wheel support, quick release for road bikes and mountain bikes (5mm)
SPECIFICATIONS
- Max. power (40 km/h): 1050 Watt
- Simulation of descent: No
- Max. torque: 17 Nm
- Max. brake force: 50 N
- Flywheel: Actual of 1.6 kg
- Mass inertia: 9.18 kg (20.2 lbs)
- Footprint (LxW): 675 x 650 mm (26.6 x 25.6 in)
- Height 410 mm (16.1 in)
- Dimensions when folded 565 x 410 x 245 mm (22.2 x 16.1 x 9.65 in)
- Weight 8.53 kg (18.8 lbs)

$369.99
For year-round training and a fully interactive indoor cycling experience, the Flow Smart trainer offers everything you need. Its wheel-on design allows for easy setup and storage. It even connects to your favorite apps, such as Zwift, Tacx, and TrainerRoad.
- Wheel-on design sets up with two easy clicks and securely locks in place
- Measures speed, power, and cadence
- Virtually silent flywheel lets you ride without disturbing others
- Works with popular third-party training apps such as Zwift and Tacx
- Train with realistically simulated inclines up to a 7% gradient
FEATURES
Type of trainer: Interactive Smart trainer with electric brake
Magnets: 6 Magnets
Transmission: Roller, 30mm
Electrical requirements: 110-240 Volt
Power indicator: None
Connection indicator (ANT/BT): None
Firmware upgradable: Yes
Suitable bikes: Race, Tri, & MTB; if necessary with axle skewer; 29" wheel with Tacx trainer tire
Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths also available
Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm)
SPECIFICATIONS
Max. power (40 km/h): 800 Watt
Max. incline: 6%
Simulation of descent: No
Max. torque: 15.3 Nm
Max. brake force: 45 N
Flywheel: 1.6 kg
Mass inertia: 11.8kg (26.0 lbs)
Calibration: Spin down
Footprint (lxw): 675 × 650 mm (26.6 × 25.6 in)
Height: 410 mm (16.1 in)
Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in)
Weight: 9.41 kg (20.7 lbs)
Article number: T2240
DATA OUTPUT AND CONTROL
Wireless communication: ANT+ FE-C, Bluetooth Smart open
Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone
Output: Cadence , Power , Speed
Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet
Error Tolerance: <5%

$719.99
$899.00
20% Off
Bigger and Stronger for a Better Ride
Featuring an improved ride feel and more accurate power measurements, this smart bike trainer has everything you need for an enjoyable and efficient indoor training session.
- Ride hard. This trainer can handle sprints up to 2,000 watts.
- Work up a sweat with inclines up to 16% that hold up to your most serious sprints.
- Accuracy matters. Measure your power to within 2.5%.
- Keep crushing it with your favorite apps, including Zwift and Tacx.
- Finally, a trainer that won’t wake the whole house when you ride hard.
ACCURATE AND RELIABLE
This trainer is redesigned to let you track your performance and progress with reliable, consistent measurements. That includes power, speed and cadence, measured accurately within 2.5%.
READY TO SPRINT
The well-balanced design and large footprint of the FLUX 2 Smart trainer ensures maximum stability, even during the most explosive sprints, up to 2,000 watts.
CLIMB HIGHER
Get the most out of your intense workouts by training on realistically simulated inclines up to a 16% gradient.
A MORE REALISTIC RIDE
At 16.8 lbs (7.6 kg), a heavy flywheel ensures a realistic ride feel and good responsiveness.
SMOOTH AND SILENT
This direct-drive trainer is designed to bring vibration and noise levels to the absolute minimum, resulting in one of the most silent flywheel-equipped bike trainers available.
IMPROVED COMPATIBILITY
The trainer comes with additional axle adapters to significantly improve the axle compatibility. It is compatible with 142x12 mm and 148x12 mm axles — right out of the box.
HIGHLY COMPATIBLE
The FLUX 2 Smart trainer communicates via BLUETOOTH Smart technology and ANT+ FE-C protocol, so it works with a number of popular training apps such as TrainerRoad and Zwift.
ABLE TO STAND ALONE
You can opt to use the trainer in stand-alone mode. When not connected, it will simulate a flat road; the faster you ride, the higher the resistance.
DEVICE COMPATIBILITY
Connect FLUX 2 Smart to multiple devices simultaneously, so you can enjoy Tacx software and track your performance on your Garmin bike computer at the same time.
TACX TRAINING SOFTWARE
Enjoy a library filled with more than 100 high-quality, real-life videos that let you experience the rush of riding the steep hills of the Alps or the cobblestone roads of Milan.
TACX TRAINING PLANS
Take advantage of structured training plans, designed for your fitness level to help you meet your goals. Race live opponents, upload GPS data, ride with 3-D maps and more.

$749.99
Looking for a smart, direct-drive trainer? The FLUX S Smart checks all the boxes: it’s reliable, accurate, silent, strong, and features a heavy flywheel for a very realistic ride feel. Made to help you sweat while cycling with your favorite apps, this bike trainer is the ideal indoor training companion.
- Measure your power within 3% error tolerance
- Next-to-silent direct drive trainer lets you ride without disturbing others
- Works with popular third-party training apps such as Zwift and Tacx
- Train with realistically simulated inclines up to a 10% gradient and a max sprint resistance of 1,500 watts
- Sturdy design easily allows for riding full-out and standing on the pedals
FEATURES
Type of trainer: Interactive Smart direct drive with electric brake
Magnets: 8 Permanent ferrite magnets & 8 electromagnets
Transmission: None
Electrical requirements: 110-240 Volt
Power indicator: None
Connection indicator (ANT/BT): 2 LEDs
Firmware upgradable: Yes
Suitable cassettes: Shimano & SRAM: 8 - 11 speed, Campagnolo. Not suitable for Specialized SCS system, SRAM XD and XD-R body sold separately
Suitable axles: Road 130mm, MTB 135mm, 142mm & 148mm thru-axles. Adapter for 135 x 10mm available.
Suitable bikes: Race, Tri, & MTB
Supplied with: Quick release for road bikes and mountain bikes (5mm), Direct-drive quick release with adapter set for 142x12mm & 148x12mm thru-axles, 1 month Tacx Premium software
SPECIFICATIONS
Max. power (40 km/h): 1500 Watt
Max. incline: 10%
Simulation of descent: No
Max. torque: 22.1 Nm
Max. brake force: 65 N
Flywheel: 7kg
Mass inertia: 22.8kg (50.3 lbs)
Calibration: Spin down
Footprint (lxw): 670 x 642 mm (26.4 x 25.3 in)
Height: 460mm (18.1 in)
Weight: 22.8kg (50.3lbs)
Article number: T2900S
DATA OUTPUT AND CONTROL
Wireless communication: ANT+ FE-C, Bluetooth Smart open
Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone
Output: Cadence, Power, Speed
Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet
Error Tolerance: <3%

$1,399.99
The iconic, progressive, and popular NEO 2 Smart is optimized with an even quieter and more powerful Smart direct drive. The motor is redesigned in order to provide a better indoor cycling experience and ride feel, especially during climbs and sprints. The NEO 2T Smart is more silent than ever thought possible and is, without question, the most powerful, realistic, and accurate bike trainer to date.
- Improved air and mechanical stillness results in a nearly silent smart bike trainer with power and cadence accuracy within 1%
- New motor design creates enhanced ride feel during climbs and acceleration and when riding at low speed or cadence
- Now enables accurate pedal stroke analysis via compatible third-party software and Edge bike computers
- Dynamic inertia compensates for weight and other factors to ensure a realistic and smooth ride
- Road feel feature lets you experience the sensation of different road surfaces, such as cobblestone and gravel
FEATURES
- Type of trainer: Interactive Smart direct-drive with motor brake
- Magnets: 32 Neodymium magnets
- Transmission: None
- Electrical requirements: 110-240 Volt, Main power optional
- Power indicator: Multicolor LED, Spot on floor
- Connection indicator (ANT/BT): 2 LEDs
- Firmware upgradable: Yes
- Suitable cassettes: Shimano & SRAM: 8 – 12 speed, Campagnolo. Not suitable for Specialized SCS system, SRAM XD and XD-R body sold separately
- Suitable axles: Road 130mm, MTB 135mm, 142mm & 148mm thru-axles. Adapter for 135 x 10mm available
- Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set for 142x12mm & 148x12mm thru-axles, 1 month Tacx Premium software
SPECIFICATIONS
- Max. power (40 km/h): 2200 Watt
- Max. incline: 25%
- Simulation of descent: Yes
- Max. torque: 85 Nm
- Max. brake force: 250 N
- Flywheel: Virtual
- Mass inertia: Variable to 125kg (275.6lbs)
- Calibration: No calibration required
- Footprint (lxw): 575 × 750mm (22.6 × 29.5 in)
- Height: 550mm (21.7 in)
- Dimensions when folded: 620 × 260 × 440mm (24.4 × 10.2 × 17.3 in)
- Weight: 21.5 kg (47.3 lbs)
- Article number: T2875
DATA OUTPUT AND CONTROL
- Wireless communication: ANT+ FE-C, Bluetooth Smart open
- Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Stand alone, Tablet
- Output: Cadence, Power, Speed
- Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet
- Error Tolerance: <1%

$66.00
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our non-slip and water-repellent (aka sweat) Floor Mat is designed to keep you safe and protect your floors while in your cycling cleats indoors. And because your cycling training plan asks for incredibly intense efforts, the Floor Mat can ensure firm contact with the ground and prevent movement during leg-busting intervals. Add a Sweat Guard to your indoor cycling collection and you’ve got a training party!
- Non-slip surface keep you safe while in cycling cleats
- Protects floors from sweat and bike grime
- Water-repellent surface does what it was designed to do – keep sweat off your floor
- Compress-ability ensures trainer stays put during intense efforts
- Easily rolls up for storage
- Cleans easily with soap and water
- Absorbs noise and vibration
- Enhances overall stability of any indoor trainer setup
- 4mm (5/32?) thickness is optimal balance of support and storage

$379.99
Love riding when you travel? Weekends spent at the races? Or just want to be able to train in a small living space? Meet the Omnium Zero-Drive Portable Trainer. The foldable, compact and adaptable fork-mount design keeps the rear wheel on the bike and offers the most dynamic ride quality of any trainer available. Plus it’s unique roller design is so quiet you’ll never disrupt the neighbors. When you’re finished, the elegant folding design hides in its padded tote like it was never there. Add a Sweat Guard and Floor Mat and you’re armed with the complete training package.
- Zero Resistance is ideal for high-speed spinning and track cycling workouts
- Adaptable fork-mount and sliding sled design (16”-29” wheel; thru-axle and QR compatible)
- Lightweight 13.3lb (6.03kg) design makes it the ideal, portable cycling training partner
- Precision machined 4.25” aluminum rollers create a smooth and quiet ride
- Dynamic, free-floating rear wheel design promotes the most realistic riding experience of any stationary bike trainer
- Included fork adapters:
- 9mm Quick-Release
- Thru Axle: 12×100mm, 15×100mm & 15×110mm
- Available fork adapters:
- Cannondale Lefty, 20x100mm (BMX thru axle), 8mm x 74mm (folding bike)
- Adaptable to virtually any bike size and geometry
- Optional Sled Extension (up to 1348mm wheelbase with optional extender)
- No tools required to assemble or store — simply unfold for cycling training and fold for storage and travel
- Maintenance-free resistance unit and roller bearings
- Includes heavy-duty, water- and abrasion-resistant tote bag for easy transport and storage

$490.00
Love training when you travel? Need an awesome warm-up and cool-down during weekends at the races? Want to crush that indoor bike trainer workout in a small living space? Meet the Omnium Over-Drive Portable Bike Trainer. The adaptable fork-mount design keeps the rear wheel on the bike and offers the most dynamic ride quality of any stationary bike trainer available. Plus the precision rollers and internal progressive resistance design is so quiet you’ll never disrupt the neighbors. When you’re finished, the elegant folding design hides it in its padded tote like it was never there. Add a Sweat Guard and Trainer Mat and you’re armed with the complete training package.
- Dynamic, free-floating rear wheel design promotes the most realistic riding experience of any stationary bike trainer
- Patented, Internal Progressive Resistance via friction-less Eddy Current
- Parabolic, progressive resistance curve accurately simulates outdoor cycling (rolling + wind resistance)
- Adaptable fork-mount and adjustable sled design (16”-29” wheel; Thru-Axle and QR compatible)
- Lightweight design for a complete bike trainer system – 14lb (6.35kg)
- Precision machined 4” aluminum rollers create a smooth and quiet ride
- Included fork adapters:
- 9mm Quick-Release
- Thru Axle: 12×100mm, 15×100mm & 15×110mm
- Available fork adapters:
- Cannondale Lefty, 20x100mm (BMX thru axle), 8mm x 74mm (folding bike)
- Adaptable to virtually any bike size and geometry (up to 1348mm wheelbase with optional extender)
- Maintenance-free resistance unit and roller bearings
- Includes heavy-duty tote bag for easy transport and storage
- Compatible with cycling apps: Zwift, The Sufferfest, TrainerRoad and Kinomap traditional trainer features*
- Patent number: 9,393,475
*Requires ANT+ or BT rear wheel speed sensor

$19.99
Train In Comfort
Use this nifty device to keep your ride comfortable. When placed under your front wheel, this block raises the front of the bike by approximately 2.75” (70mm) to give you a more level and stable platform for your workout.

$50.00
Blackburn's axle conversion kits make your thru axle bike compatible with most trainers and many trailer hitches on the market. The adapter kit is designed to turn your 12mm x 135mm, 142mm, or 148mm thru-axle bike into a trainer-ready machine or a trailer-pulling family explorer. Choosing the correct axle is simple. First, research which axle spacing your bike utilizes (135, 142, or 148mm). Next, choose the correct thread pitch by either comparing your thread spacing to Blackburn's thread scale on the packaging or by matching to one of the brands listed below:
- RockShox Maxle - 1.75mm thread pitch
- Syntace X-12 - 1.0mm thread pitch
- DT x-12 - 1.0mm thread pitch
- Shimano E-Thru - 1.5mm thread pitch
- DT E-Thru - 1.5mm thread pitch
Page 1 of 1