650B

Trail wheels often fall into two categories—they’re either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 27.5 puts all the flick'able, nimble features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they’re far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they’re strong, impact-resistant, and tire supporting—they must be heavy, right? Wrong. Even though “fattie” is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered.

• Model Number : WH-M8020 • Series : DEORE XT • Brake Type : Center Lock Disc • Axle Type : 15mm E-Thru • Over Locknut : 100mm • Axle Length : 100mm • Rim Type : Offset rim • Rim Height : 18.8mm • Rim Width : 27.9mm • Recommended Tire : 27.5x2.00-2.40 • Increased tire rigidity for improved traction. • 24C wide-profile offset rim. • Front/ Rear: E-thru. • 28pc butted spokes (F&R). • Offset rim design for durable wheel construction.

Race Face's first carbon wheelset comes to market during peak enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 year no fault guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos

- Quality entry-level 27.5'' MTB disc brake wheel - Tubeless-ready Alex MD19 rim is strong and lightweight (470g) - Shimano MT200 hubs feature adjustable cup-and-cone bearings for trouble free long term performance - 32 black stainless steel spokes and brass nipples for long term reliability

- High quality entry-level 27.5" Boost MTB disc brake wheelset - 15 x 110mm thru axle - Tubeless-ready Alex MD19 rim is strong and lightweight (470g) - Shimano MT400 hubs feature adjustable cup-and-cone bearings, aluminum front axle and steel rear axle for a perfect blend of toughness, lightness, durability and reliability - 32 black stainless steel spokes and brass nipples for long term reliability

- Affordable and reliable 27.5" / 650B disc brake wheelset for entry-level hybrid, MTB and touring bikes - Black Alex Z1000 single wall rim offers great performance and look at a low price - Non-machined sidewalls give best results with disc brakes, but can also be used with rim brakes - Black Shimano Tourney TX505 Center Lock disc hubs feature adjustable cup-and-cone bearings for trouble free long term performance & quick release 100mm front axle for increased convenience - 36 stainless steel spokes and brass nipples for improved durability

- Evo Tour 19 27.5" double wall rim—Black - Inner Rim Width: 19 mm - Rim Height: 20 mm - Pin joint construction - No Eyelets - Schrader valve - 36 holes - Stainless steel spokes—Silver - Freewheel

- Evo Tour 19 27.5" double wall rim - Black - Inner Rim Width: 19 mm - Rim Height: 20 mm - Pin joint construction - No Eyelets - Schrader valve - 36 holes - Stainless steel spokes - Silver - Cassette Compatibility: Shimano HG

- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim and Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula DC-20 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width - - Depth 20mm - Rim Model Evo E-Tour 19 - Skewers Included Yes

- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula FM-21-QR - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width - - Depth 20mm - Rim Model Evo E-Tour 19 - Skewers Included Yes

Rims: Evo Tour 19 27.5" - ETRTO 584-19 - Inner width: 19mm - 6061-T6 Alloy - Double Wall - Powder Coat satin black finish - CNC machined sidewalls - Drilled for Schrader valve - Rim or Disc Brake compatible - 36 holes Front hub: - QR 9x100mm (Quick Release binder included) - 6-Bolt ISO disc mount - 6061-T6 Alloy - Anodized black finish - Adjustable bearings - Rubber seals

Rims: Evo Tour 19 27.5" - ETRTO 584-19 - Inner width: 19mm - 6061-T6 Alloy - Double Wall - Powder Coat satin black finish - CNC machined sidewalls - Drilled for Schrader valve - Rim or Disc Brake compatible - 36 holes Rear hub: - QR 10x135mm (Quick Release binder included) - 6-Bolt ISO disc mount - 6061-T6 Alloy - Anodized black finish - Adjustable bearings - Rubber seals - HG freehub compatible with 8/9/10 speed

Rims: WTB DX18 27.5'' (ETRTO 584), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Front hub (-01): Alloy, Disc and Rim brake compatible, Sealed, Quick Release, Hollow CrMo axle M9x100mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: WTB DX18 27.5'' (ETRTO 584), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Rear hub: Alloy, Disc and Rim brake compatible, Shimano HG, Sealed, Quick Release, Hollow CrMo axle M10x135mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Rear hub: Alloy, Disc and Rim brake compatible, Shimano HG, Sealed, Quick Release, Hollow CrMo axle - Anodized black finish - Adjustable bearings - Quick Release Binders Included Assembled in North America by experienced wheelbuilders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: WTB DX18 27.5'' (ETRTO 584), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Front hub: Shimano HB-M475 (Black) - 9x100mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub - Quick Release Binder included Rear hub: Shimano FH-M475 (Black) - 10x135mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub and freehub body - Quick Release Binder included - Compatible with 8,9,10 speed (MTB 11 speed requires 1.85mm spacer, not included) - Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: WTB DX18 27.5'' (ETRTO 584), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Front hub: Shimano HB-M475 (Black) - 9x100mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub - Quick Release Binder included Rear hub: Shimano FH-M475 (Black) - 10x135mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub and freehub body - Quick Release Binder included - Compatible with 8,9,10 speed (MTB 11 speed requires 1.85mm spacer, not included) - Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Front hub: Sram 900 Boost - 15x110mm Thru-Axle (Axle not included) - 6 Bolt Disc Mount - Sealed cartridge bearings

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs options: Shimano FH-MT410-B (Boost, MS) - 12x148mm (Axle not included) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs options: Shimano XT FH-M8010-B (Boost, HG) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Polyax Nipples (Black)

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs: FH-M8130-B (SuperBoost, MS) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Polyax Nipples (Black)

Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Formula DC20 (Black), Laser etched logo, M9x100m - 6-bolt disc mount - Adjustable bearings - Quick-Release binders included - Tubeless Compatible (Valve and Tape not included) Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Formula DC22 (Black), Laser etched logo, M10x135mm - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt disc mount - Adjustable bearings - Quick-Release binders included - Tubeless Compatible (Valve and Tape not included) Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: WTB ST i23, inner width: 23 mm - TCS 2.0 Tubeless system - Solid Strip (incl.) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes Front hub: - Shimano HB-MT200, M9x100mm - Center Lock disc mount - Adjust. bearings - Quick Release binder incl. Rear hub (-02): - Shimano FH-MT200-B, M9x141mm - HG Freehub compatible with MTB 8-11spd - Center Lock disc mount - Adjust. bearings - Quick Release binder incl. Rear hub (-03): - Shimano FH-M4050, M9x135 - HG Freehub compatible with MTB 8-11spd - Center Lock disc mount - Adjust. bearings - Quick Release binder incl. Tubeless Compatible (Valve and Tape not included)Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes and 14mm Brass Polyax Nipples

- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Formula DC711 (Black), Laser etched logo, 15mm TA, O.L.D. 110mm BOOST - 6-bolt disc mount - Sealed bearings (DC711 & DHT148) - TA Axles not incl. - Quick Release binder included (DC2241) - Tubeless Compatible (Tubeless Valve included) Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub (1): Formula DHT148 (Black), Laser etched logo, 12mm TA, O.L.D. 148mm BOOST - Rear hub (2): Formula DC2241 (Black), Laser etched logo, M9x141mm BOOST141 - HG Freehub compatible with 8-10, MTB 11-speed - 6-bolt disc mount - Sealed bearings (DC711 & DHT148) - TA Axles not incl. - Quick Release binder included (DC2241) - Tubeless Compatible (Tubeless Valve included) Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

The Arch MK4 is the wheelset a lot of us here at Stan's choose to ride. All-mountain, Downcountry, Trailduro—whatever they're calling it this week, when you like pushing your limits on climbs, descents, and every kind of trail, this is your wheelset. The Arch MK4's 28mm internal width and patented lightweight, low-profile design is not afraid to climb, while being an absolute monster on the descents. With a welded seam, reinforced spoke bed, and durable 6069 aluminum construction, the Arch MK4 rims give you the confidence to ride everything. When it comes to a consistent and reliable airtight tubeless seal, nothing beats Stan's patented Bead Socket Technology. The Arch MK4 rims feature an asymmetric design with offset spoke holes to improve spoke angle and create a stronger all-around wheel. Unlike most asymmetric rims that suffer from difficult inflation and poor tubeless performance, Stan's BST-Asymmetric design delivers all the advantages of a stronger wheel, with no compromises in tubeless performance. Nobody likes downtime, so the Arch MK4 wheelset is built with traditional J-bend spokes based on their proven strength, ride quality, and easy serviceability. Stan's has always made it easy to find replacement spokes should you ever damage your wheel, and now we've made it even easier. MK4 front and rear wheels of the same diameter all use the exact same very common spoke length, both sides, front and rear. Serviceability doesn't get any easier than that. From the first click of the incredible M-pulse hubs, it's clear that confidence is the philosophy behind every part of this wheelset. Designed and CNC machined by Project321 in Bend, Oregon, M-pulse freehubs feature 6 pawls with Neodymium magnets that lock into place with greater force than conventional pawl springs, but offer virtually no resistance when coasting. Multiple teeth on each pawl offer better load distribution for years of trouble-free riding, and the angle of the pawls was engineered to transfer stress away from the rotating bearings, decreasing stress and wear on the entire freehub. That durability extends to the 17mm axles machined of 7075 aluminum and the full complement of Enduro brand bearings, including a double-row freehub bearing. M-pulse internals are also fully shielded inside the hub, because the only thing better than a good bearing seal is a good bearing seal most dirt can't even reach. As durable as they are, these hubs are also built for speed. M-pulse hubs engage with only 1.66°of rotation, putting down power nearly instantaneously, but how smooth these hubs roll is what really stands out. Adjustable preload allows you to fine tune M-pulse hubs for reduced friction, and less drag means more speed on the ground.The result is a bombproof hub with quick, consistent engagement and less resistance for more speed. Available with Shimano Micro Spline, HG, or SRAM XDR freehub, and 6-bolt or Centerlock brake style, with options to fit all popular axle configurations. Tubeless ready with rim tape installed. The Arch MK4 is our most versatile wheelset, and the best aluminum wheelset available for riders who want to push limits on every trail. Up, down, and wherever the ride takes you, the Arch MK4 wheelset has it under control. - Arch MK4 wheels include pre-installed tape for tubeless use and presta valves. - Versatile 28mm internal rim width optimized for 2.2-2.5” tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed - BST-Asymmetric design combines Stan’s legendary easy tubeless inflation with a stronger, more balanced wheel build - M-pulse ultra-low drag magnetic pawl adjustable hubs with 1.66° engagement - Enduro bearings with double-row freehub bearing - Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability - Connection program includes 5-year hub warranty, 3-year rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice

Wider and even lower in profile, the Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. Crest MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling - Wider but even lighter than the original Crest - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - Legendary Crest climbing and speed in a high volume rim