Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Headsets

$11.99
- Steel cups
- Steel retainer bearings
- Available in chrome or black
- S.H.I.S.: EC34/28.6-26tpi|EC34/30
- Steerer Dia: 28.6mm
- Cup Dia: 34mm
- Race Dia: 30mm
- Stack Ht: 40mm
Size: 1-1/8"

$49.99 - $69.99
Origin-8's SSR Threadless Headset is for 1 1/8-inch threadless forks. It features CNC machined 7075-aluminum cups and stainless-steel cartridge bearings for excellent performance and long life. It also comes in many colors to customize your ride.
- 93g including star nut and laser top cap
- Stack Height: 28.5mm
**Anodized colors will vary from batch to batch and may not match exactly
- S.H.I.S.: EC34/28.6|EC34/30

$13.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible

$63.99 - $94.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

$63.00
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Uses 36/45 degree crown race and compression ring
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

$78.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

$149.00
Cane Creek's AngleSet transforms your ride. It enables an effective head-tube angle adjustment of up to +/- 1-degree so you can fine-tune your mountain bike's front-end handling to best suit your riding style, local terrain and race course. Installation is straightforward because the AngleSet automatically adjust to fit different head tube lengths and angles. All AngleSet headsets have light, tough, and beautiful machined 7075 T6-aluminum cups with Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out.

$9.00 - $13.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Durable steel construction

$99.99 - $119.99
Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing.
- Designed to bridge the gap between the 40-series and 110-series headsets

$10.45
Grade 300 retainer bearings for headset and bottom bracket service
- 5/32" ball diameter
- 16 balls per retainer
- Grade 300 Bearings
- 10 Retainers/Bag

$31.99
High-quality replacement headset bearings are smooth like butter.
- Sealed cartridge bearing for long life
- Durable steel bearing housing

$35.00
These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work.
- Engineered and manufactured in Portland, Oregon USA
- Devolution baseplates are a stainless steel solution that allow Chris King headsets to adapt to a wide variety of steerer tube sizes
- 30.0mm for 1.5 lower bearing and 1 1/8" steerer

$176.00
Chris King DropSet 3 Headset.
- Crown Race: 30
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
- Bearing Type: Cartridge
- S.H.I.S Lower: IS52
- S.H.I.S Upper: IS41

$176.00
Why We Make This
The simple answer is that many contemporary bicycle frame designs call for the headset bearings to ride inside the frame's headtube. After decades of making press-in bearing headsets, we needed to make headsets that worked in these newer frames.
From the beginning we understood that integrated headsets posed a unique challenge in that the bearings are not pressed into a cup and sit loosely in the frame. When bearings are not pressed securely into a cup they shift and move, rapidly losing preload. As preload drops, the bearings are more susceptible to creaking, damage, and failure. That's a problem we know how to solve.
Why You Want It
Enter, our patented GripLock™ bearing cap. The GripLock™ preloads the headset independently of clamping onto the steerer, so it retains preload far better than the competition and is impervious to the ill effects of load spikes from large hits and heavy braking. This means smoother steering, no more creaking, and a longer lasting headset.
Our GripLock™ design also takes the guesswork out of preloading a headset, because the bearing preload force is independent of the clamping force. Our headsets can be preloaded to a torque spec.
Compatible with many Specialized mountain bike frames, see headtube specifications here. Not compatible with the 21'-22' Stumpjumper EVO.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517)
- 42mm 45x45 upper bearing for 6.85-7.05mm bearing ream depth.
- 52mm 45x45 lower bearing
- Compatible with our included baseplate and 45 degree integrated crown races

$188.00
The Chris King GripNut Threaded Headset incorporates a threaded collet that firmly clamps the threads for better holding power and includes a ten-year warranty.
- User-serviceable stainless steel cartridge bearings with full-contact seals
- GripNut headset incorporates a threaded collet that firmly clamps the threads for better holding power
- 10-year warranty
- Requires installation tool adaptor

$207.00
Got a threaded steerer without spacers or brake hangers? Chris King's GripNut Headset is the choice for you. Ideal for heavy touring and riding over rough terrain, the GripNut features an extra threaded collet that locks the steerer in place, offering incredible holding power and adjustability. It’s also a welcome solution for forks with damaged or undersized threads. The additional collet makes it easy to install a fork that's had its steerer tube cut too short.

$188.00
The King GripNut Headset is designed for threaded steerer that don’t require a cable hanger or additional spacers.
- Collet locking system stays securely adjusted
- King made-in-house bearings
- 10-year warranty

$188.00 - $207.00
Got a threaded steerer without spacers or brake hangers? Chris King's GripNut Headset is the choice for you. Ideal for heavy touring and riding over rough terrain, the GripNut features an extra threaded collet that locks the steerer in place, offering incredible holding power and adjustability. It’s also a welcome solution for forks with damaged or undersized threads. The additional collet makes it easy to install a fork that's had its steerer tube cut too short.

$207.00
The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 2 is compatible with tapered 1-1/8 - 1-1/2-inch forks and frames using a 44/56mm headtube.

$238.00
Why We Make This
Contemporary bicycle frame designs are incorporating larger diameter headtubes and forks with tapered-steerers to improve the bike's front end stiffness, and as a result handling accuracy. This move has made particular sense for off-road bikes. We evolved the form and function of our legendary NoThreadset to address the variety of tapered steerers and headtubes on the market today.
Why You Want It
Every Chris King headset is built with our heat-treated bearings, and surgical-grade steel races machined simultaneously to ensure they are perfectly matched. As Chris King bearing tracks age and burnish, they actually get smoother, and all headsets are fully serviceable for years upon years of demanding riding.
The Chris King InSet™ 7 combines seamless design and legendary quality in a 44mm headset with an external lower cup that is a precision headset option for your 1.5” tapered steerer fork. Our InSet™ 7 is equipped with our exclusive built-in-house bearings and our patented GripLock® system for precise fit and function.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517)
- Responsibly lightweight
- Designed specifically for a 44mm straight headtube and a 1-1/8” to 1.5” tapered steerer tube

$207.00
The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary, made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 7 is compatible with tapered 1-1/8 - 1-1/2-inch forks and frames using a 44mm headtube.

$188.00
Why We Make This
Headtube and fork steerer standards have proliferated in recent years, but for a long, long time these variables were more fixed, so we made thousands upon thousands of NoThreadsets™ to serve bikes with unthreaded fork steerers. We made them in a variety of diameters, and everyone was happy in the land. We still make it, because it's still a great headset for all those bikes that are still rolling through the world with a headset that will never die.
Why You Want It
For decades our NoThreadSet™ set the standard for quality headset function delivering precision performance to numerous world champions, grand tour winners, and aspiring riders around the world.
Every Chris King headset is built with our heat-treated bearings, and surgical-grade steel races machined simultaneously to ensure they are perfectly matched. As Chris King bearing tracks age and burnish, they actually get smoother, and all headsets are fully serviceable for years upon years of demanding riding.
- Engineered, manufactured, and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) (1-1/8" only)
- Available in 9 beautifully anodized colors in both bold and sotto voce marking options
- Responsibly lightweight
- Options to fit 1" and 1-1/8" straight steerer tubes
- 1-1/8" available in Matte finish

$188.00
Why We Make This
Headtube and fork steerer standards have proliferated in recent years, but for a long, long time these variables were more fixed, so we made thousands upon thousands of NoThreadsets™ to serve bikes with unthreaded fork steerers. We made them in a variety of diameters, and everyone was happy in the land. We still make it, because it's still a great headset for all those bikes that are still rolling through the world with a headset that will never die.
Why You Want It
For decades our NoThreadSet™ set the standard for quality headset function delivering precision performance to numerous world champions, grand tour winners, and aspiring riders around the world.
Every Chris King headset is built with our heat-treated bearings, and surgical-grade steel races machined simultaneously to ensure they are perfectly matched. As Chris King bearing tracks age and burnish, they actually get smoother, and all headsets are fully serviceable for years upon years of demanding riding.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) (1-1/8" only)
- Available in 9 beautifully anodized colors in both bold and sotto voce marking options
- Responsibly lightweight
- Options to fit 1" and 1-1/8" straight steerer tubes
- 1-1/8" available in Matte finish

$188.00
NoThreadSet is built to be precise and dependable and a classic. Engineered, manufactured and assembled in Portland, OR. Patented GripLock retention design for reliable headset adjustment.
- Engineered, manufactured and assembled in Portland, Oregon USA
- Chris King made-in-house bearings
- Crown Race: 40
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
- Bearing Type: Cartridge
- S.H.I.S Lower: EC44
- S.H.I.S Upper: EC34

$154.00
Chris King led the threadless headset revolution with their NoThreadSet. This iconic, incredibly durable piece of equipment embodies the limitless potential found in simple, high-quality design. Equally appropriate on your road or mountain bike, the NoThreadSet has been ridden to World Cup titles on the trail and to victory at the Tour de France. Featuring precision-machined aluminum cups, King's own made-in-house stainless steel bearings, a stainless steel base plate, and all ten Chris King colors, each headset is a statement piece that will likely outlast your bike! The Sotto Voce models feature stealthy, toned down graphics that let you show your Chris King pride in a more subtle manner.
Page 1 of 3
Next page